Car breakpoint short circuit finder EM415PRO EM415 open circuit electronic detection tool line detection

Поиск короткого замыкания автомобиля EM415PRO EM415 инструмент для электронного обнаружения открытой цепи

Цена
¥28.00 / ≈ 341 ₽
MOQ: 1 pcs
1шт - ¥28.00
Продавец
深圳市鹏贸源电子商务有限公司
Рейтинг
0
Продано
1
Всего
В наличии
36826
SKU суммарно

Offer ID: 889234253360

Статистика продавца

4.0
Сервис
Источник: API 1688
3.5
Логистика
Источник: API 1688
5.0
Споры
Источник: API 1688
5.0
Оформление
Источник: API 1688
4.0
Консультация
Источник: API 1688
46%
Повторные покупки
Источник: API 1688
2.7
Постпродажное
Источник: API 1688
66%
Ответ ≤48ч (30д)
Источник: API 1688
0%
Возврат по качеству (30д)
Источник: API 1688

Свойства товара

Происхождение China
Импортируется ли? No
Номер заказа EM01
Обработка и настройка No
Номер товара EM01
Тип Car fault detector
Система обнаружения 00
Напряжение питания 6-42
Рабочая температура 0
Размер 25.5*12.5*3.5
Бренд Neutral
Модель s0000
Основная платформа сбыта Independent station, LAZADA, Other
Основные торговые зоны African, Europe, South america, Southeast asia, North america, Northeast asia, Middle east
Является ли это специальным источником поставок для трансграничного экспорта? Yes

Описание товара

汽车断点短路寻线器 EM415PRO EM415 断路电子检测工具

25.5*12.5*3.5 重量290克

 

FUNCTION:

 

* Tracing of wires is made possible even inside bundles, co-

 

nduits, behind panels, under carpets, upholstery, etc

 

* Easy to use: simply connect the transmitter in series with

 

the circuit or wire under test, (i.e.: in place of a blown fuse,

 

across a connector, in series with an open wire, a light bulb

 

socket, etc.), and scanning the circuit/wire with the tracers

 

flexible probe to find the trouble spot

 

* 42 V Ready: for use in the new generation of vehicles with

 

mixed or single 42 Volt systems

 

* Operates on DC voltages from 6 to 42 volts

 

* Internally protected against power surges and overloads

 

* 7" flexible probe allows reaching wires in congested places

 

* Transmitter and Receiver LEDs show open or short circuit

conditions

 

* Adjustable sensitivity for all tracing situations

 

* No wire piercing required, non-contact technology!




HOW TO USE THE PROBE?

The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach

 

wires in ongested or difficult areas. Depending on the circuit characteristic and sensitivity settings,

 

the probe will pick up the signal from the wire in a range of positions. However, for the best

 

possible range the Receiver's probe tip (black cap) should be positioned perpendicular (at 90o)

 

to the wire being traced and either above or below it.

 

Package List:

1 x Automotive Short and Open Finder

 

1 x Instruction Manual

undefined

undefined

undefined