Машина для горячей и холодной формовки верхней части обуви Caddy 3D, машина для деформации и формовки верхней части обуви

用途：

适用于女士高跟鞋和男女靴子在打结前对鞋面进行定型。

定型机制：

塑膜采用耐热硅胶材质，前后位置可调，外铝模温度可达200​​℃。

特点：

1、加热铝模高度可调；

2、定型后，内衬紧密贴合，不起皱、不变形、不起泡，可减少损坏；

3、可及时进行造型打样，缩短样品开发时间，降低成本，更好地满足客户需求；

4、鞋后跟形状精准，便于鞋头操作，可提高生产效率。

压力表：

两侧的压力表分别调节气囊压力和二次压力。

Purpose:
Suitable for women's high heels and men's and women's boots to shape the upper before the knot.
Shaping mechanism:
The plastic film is made of heat-resistant silica gel, and the position can be adjusted before and after, and the temperature of the outer aluminum mold can reach 200 'C.
Features:
1, the height of the heating aluminum mold can be adjusted:
2, after the stereotypes, the lining is closely bonded, not wrinkled, not deformed, not blistered, and can reduce damage;
3, can be timely modeling proofing, reduce sample development time, reduce costs, and better meet customer requirements;
4, the accurate shape of the back of the shoe is easier to operate on the front, which can increase production.
Pressure gauge:
The pressure gauges on both sides can adjust the air bag pressure and the secondary pressure respectively.